|
|
The "LS2000" software enables you to
control laser markers and laser trimmers. The software runs under
Windows, XP preferable. The LS2000 software enables you to:
write user programs
execute user programs
simulate user programs
The user programs are developed by means of a flowchart which includes a
list of commands. During programming the software checks for missing
program parts, such as specific parameters, and requests the user to
insert these.
All positioning and laser cuts can be displayed as lines in a simulation
on the monitor screen. For this purpose the Galvo Control Card (GKK) for
controlling the defection unit is not required.
A user program must generally be constructed from the following
components:
1. Sets of parameters to control the laser
2. Positioning commands for beam deflection
3. Marking commands
4. Control and/or branch commands as necessary for program flow
Beside the programmer’s mode you can run LS200 in an user mode as well.
Than a customised html-page is displayed instead of the flow-chart.
Within this page you can monitor company logos and variable data as well
as start actions like input of variable data. |
|
